manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 186

Setting Specifications That Are Common to Each Function (Common Settings)

3-42

3

Customizing Settings

3

Press [On] 

➞

 select a desired language.

If the desired language is not displayed, press [

▼

] or [

▲

].

Press [Off], if you do not want to change the display language.

4

Press [OK].

The selected mode is set, and the display returns to the Basic Features screen.

NOTE

•

If Language Switch is set to ‘On’, some characters are restricted and cannot be 
entered. To enable all characters, perform the following steps.
- On the Language Switch Screen Display, select [Off] 

➞

 press [OK]

•

Even if Language Switch is set to ‘On’, there are some languages that cannot be 
displayed.

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands