manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 422

When the Power Does Not Turn ON

6-52

6

T

roub

leshooting

When the Power Does Not Turn ON 

If the machine does not operate, even though the main power switch and the 
control panel switch are both ON, check that the breaker is not OFF.

If the breaker is OFF, contact your local authorized Canon dealer. Do not switch the 
breaker back ON.

WARNING

If the breaker is in the OFF position, do not switch the current leakage breaker 
back ON. Doing so may lead to a fire, electrical shock, smoke, or the tripping of 
other breakers in the facility.

(I side)

(    side)

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands