manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 287

Setting Forwarding Conditions (Forwarding Settings)

4-63

System Manager Settings

4

9

Press [Done].

10

Press [Forwarding Destination] 

➞

 select [Address Book] or 

[Conf. Fax Inbox].

[Address Book]:  Select to forward the received document to another machine 

(relay function).

[Conf. Fax Inbox]: Select to store the received document in a Confidential Fax 

Inbox.

NOTE

•

If you specify a group address that includes user inboxes as destinations, the 
documents are not forwarded to those inboxes.

•

You cannot select [Conf. Fax Inbox] if you do not set the forwarding conditions as 
follows:
- To: [disregarded]
- From: [equals]
- Subject: [disregarded]

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands