manualshive.com logo in svg

Canon imagePROGRAFi iPF840 series, User Manual

Share
Download
Canon imagePROGRAFi iPF840 series User Manual Download Page 645

Cause

Corrective Action

You are using paper that is
not compatible with auto-
matic cutting.

Specify 

Manual

 as the cutting method and cut the roll manually.

 (See "

Specifying the Cutting Method for Rolls

.")

➔

P.360

For information about paper that is compatible with automatic cutting, see the 

Paper Reference

Guide

.

 (See "

Displaying the Paper Reference Guide

.")

➔

P.335

The Cutter Unit stops in the
middle of cutting.

If the Carriage is out, move the Carriage out of the way, away from the paper.
If the Cutter is out, move the Cutter to the right side (away from the paper) and remove the jammed
paper.

 (See "

Clearing Jammed Roll Paper

.")

➔

P.605

If the paper cannot be cut using the Cutter Unit, specify 

Manual

 as the roll cutting method and cut the

roll manually.

 (See "

Specifying the Cutting Method for Rolls

.")

➔

P.360

In other cases, the Cutter
Unit may be damaged.

Contact your Canon dealer for assistance.

End of paper feed.

End of paper feed.

Cause

Corrective Action

Although an attempt was made to advance the paper manually, it reached the limit
position that can be advanced.

Canceling manual advancing.

 (See "

Feeding Roll Paper Manually

.")

➔

P.357

Rel lever is in wrong position.

Rel lever is in wrong position.

Cause

Corrective Action

The Release Lever is up. Lower the Release Lever.

If the error occurs again, turn off the printer and wait a while before restoring power.

Borderless printng not possible.

Borderless printng not possible.

Cause

Corrective Action

The print job received specifies a
type or width of paper that is not
compatible with borderless print-
ing.

Follow these steps to change the settings of the print job to enable borderless printing.

1.

Press 

▲

 or 

▼

 to select 

Stop Printing

, and then press the 

OK

 button.

2.

Make sure the correct printer driver for the printer is selected and try printing again.
For information on types of paper compatible with borderless printing, refer to the 

Paper

Reference Guide

.

 (See "

Displaying the Paper Reference Guide

.")

➔

P.335

Press 

▲

 or 

▼

 to select 

Print With Border

, and then press the 

OK

 button to continue printing.

The document will be printed with a border.

The loaded paper is a size not
compatible with borderless print-
ing.

Press 

▲

 or 

▼

 to select 

Stop Printing

, and then press the 

OK

 button.

Replace the paper with paper compatible for borderless printing as follows.

1.

Press 

▲

 or 

▼

 to select 

Change Paper

, and then press the 

OK

 button.

 (See "

Removing the Roll from the Printer

.")

➔

P.352

 (See "

Removing the Roll Holder from Rolls

.")

➔

P.356

2.

Replace the paper with paper compatible for borderless printing.

 (See "

Attaching the Roll Holder to Rolls

.")

➔

P.342

 (See "

Loading Rolls in the Printer

.")

➔

P.345

The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the 

Paper

Reference Guide

.

 (See "

Displaying the Paper Reference Guide

.")

➔

P.335

Press 

▲

 or 

▼

 to select 

Print With Border

, and then press the 

OK

 button to continue printing.

The document will be printed with a border.

Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the supported
width for borderless printing.

Use each type of paper only where the recommended environmental conditions are met. For
details on environmental conditions for various paper, see the 

Paper Reference Guide

.

 (See "

Displaying the Paper Reference Guide

.")

➔

P.335

iPF840

                                                                                                                                                                                                 

End of paper feed.

User's Guide

                                                                                                                                                                                                                      

 

 

Error Message

Messages regarding paper

645

 

Summary of Contents for imagePROGRAFi iPF840 series







































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands