manualshive.com logo in svg

Canon imagePROGRAFi iPF840 series, User Manual

Share
Download
Canon imagePROGRAFi iPF840 series User Manual Download Page 452

Setting Item

Description, Instructions

GL2
Settings

Line &
Pen
Manag-
er

Ln wdth correct

You can configure 

Black/gray

 and 

Color

 for each group.

The specified range is -20 to +20.

Proces-
singOp-
tion

Warning

Select 

On

 to have any GL2-related warnings displayed.

On-the-Fly

Selecting 

On

 will start printing jobs sooner if you are print-

ing only HP RTL print jobs and printing would not start un-
til later. However, images may be incomplete in some ca-
ses, so be sure to check the printing results.

Detect img size

Sets the method of deciding the region to output in order
to print efficiently while avoiding missing images.
If 

Off

 is selected and the data contains image range infor-

mation, the image range information is followed.
If 

Off

 is selected and the data does not contain image

range information, a size with the maximum roll paper
width of the printer for the width and 1.5 times the maxi-
mum roll paper width for the length is used.
If 

Command priority

 is selected and the data contains

image range information, the image range information is
followed.
If 

Command priority

 is selected and the data does not

contain image range information, the detected minimum
image area is used.
If 

Detected size

 is selected, the detected minimum image

area is used.

GL2 Set Print

Print GL2 settings information.

Inter-
face
Setup

EOP Timer

Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.

TCP/IP

IPv4

IPv4 Mode

Choose whether the printer IP address is configured auto-
matically or a static IP address is entered manually.

Proto-
col

DHCP

Specify the protocol used to configure the IP address au-
tomatically.

BOOTP

RARP

IPv4
Settings

IP Address

Specify the printer network information when using a stat-
ic IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
The value that was automatically configured is displayed if
you have set 

IPv4 Mode

 to 

Automatic

.

Subnet Mask

Default G/W

DNS
Settings

DNS Dync update

Specify whether DNS server registration is updated auto-
matically.

Pri. DNS SrvAddr

Specify the DNS server address.

Sec. DNS SrvAddr

DNS Host Name

Specify the DNS host name.

DNS Domain Name

Specify the DNS domain name.

IPv6

IPv6 Support

Specify whether to connect via IPv6.

IPv6 StlessAddrs

Specify whether a IPv6 stateless address is used.

DHCPv6

Specify whether DHCPv6 settings are used.

DNS
Settings

DNS
Dync
update

Statefull
Addr

Specify whether DNS server registration is updated auto-
matically.

State-
less
Addr

Pri. DNS SrvAddr

Specify the DNS server address.

Menu Settings

                                                                                                                                                                                                       

iPF840

                                                                                                                                                                                                                     

User's Guide

 

 

Control Panel

Printer Menu

 

452

Summary of Contents for imagePROGRAFi iPF840 series







































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands