manualshive.com logo in svg

Canon IMAGEPRESS C7010VPS, Operation Manual

Share
Download
Canon IMAGEPRESS C7010VPS Operation Manual Download Page 88

Access Settings Editor settings via the operator panel

Introduction

NOTE

The information contained in this section is primarily intended for key operators and system

administrators.

The Settings Editor application on the PRISMAsync controller is a web based application that
allows key operators and system administrators to adapt the system completely to the situation
in an organization and production environment. The Settings Editor allows key operators and
system administrators to manage settings with regard to network configuration, system
preferences, job preferences and media, for example.

For convenience reasons, a subset of frequently used settings is accessible through the operator
panel.

NOTE

You need the key operator PIN or the system administrator PIN to make changes in this section.

This PIN is the same as used when accessing the Settings Editor application on the PRISMAsync

controller.

Settings available through the operator panel

Group of settings

Available settings

Short description

[About]

• [Serial number]

(read-only)

• [Version of printer

software] (read-on-
ly)

The [About] section allows you to look up the
serial number and software version of the
printer. You can also upgrade the printer soft-
ware through this section.
Follow the instructions on the operator panel
when you upgrade the software.

[Software licenses]

• [Upload license]

When you have a new license to activate a
new feature on the printer, you can upload the
license through this section. After uploading
the license, the feature becomes active.
Follow the instructions on the operator panel
when you upgrade the software.

[Logging]

• [Save the data-

dump file]

• [Save the trace file]
• [Print the configura-

tion report]

When an error occurs, the help desk of your
printer supplier can ask you to create and send
a datadump file. The datadump file is a .zip file
that contains detailed technical information
about your system. Furthermore, the system
can store trace log files in .zip files. You can
save both .zip files to a USB location.
The configuration report contains information
about the configuration of your printing sys-
tem, for example information about the sys-
tem configuration, controller configuration or
network settings. You can print the configura-
tion report for backup purposes, for example.
Follow the instructions on the operator panel
when you save a file or print a report.

4

Access Settings Editor settings via the operator panel

88

Chapter 6 - Adapt printer settings to your needs

Summary of Contents for IMAGEPRESS C7010VPS








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands