manualshive.com logo in svg

Canon IMAGEPRESS C7010VPS, Operation Manual

Share
Download
Canon IMAGEPRESS C7010VPS Operation Manual Download Page 329

IMPORTANT

When replacing toner cartridges, make sure that the color of the toner cartridge matches the
color of the toner supply port. If the color is different, the toner cartridge will not fit into the port.

6.

Close the inner toner replacement cover.

7.

Close the outer toner replacement cover.

CAUTION

When closing the toner replacement cover, be careful not to get your fingers caught, as this
may result in personal injury.

8.

After replacing toner cartridges, if printed colors are different from the colors printed before you
replaced the toner cartridges, perform the [2. Auto gradation adjustment] procedure.

Replacing the toner cartridge

Chapter 13 - Add toner and staples

329

Summary of Contents for IMAGEPRESS C7010VPS








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands