manualshive.com logo in svg

Canon IMAGEPRESS C7010VPS, Operation Manual

Share
Download
Canon IMAGEPRESS C7010VPS Operation Manual Download Page 34

Component

Function

7

Upper tray

Receives finished documents

8

Inserter

The inserter is used to feed cover sheets
for printed documents and booklets. The
inserter is also an option for the Finisher-
AJ1.

Internal view

1

2

[9] The finisher module

Main parts

Component

Function

1

Punch waste tray

Pull out the punch waste tray to remove
punch waste.

2

Staple waste tray

Pull out the staple waste tray to discard
the staple waste.

Finishing options

IMPORTANT

• Do not place anything other than output paper in the trays of the finisher, as doing so may

damage the trays.

• Do not place anything under the trays of the finisher, as doing so may damage the trays.

The stacker/stapler, optional inserter and optional integrated punch unit

34

Chapter 2 - Main parts

Summary of Contents for IMAGEPRESS C7010VPS








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands