manualshive.com logo in svg

Canon IMAGEPRESS C7010VPS, Operation Manual

Share
Download
Canon IMAGEPRESS C7010VPS Operation Manual Download Page 178

Delete print jobs

Locations from which jobs can be deleted

You can delete jobs from the following locations.
• List of [Printed jobs] (if this function is enabled in the Settings Editor).
• List of [Scheduled jobs].
• List of [Waiting jobs].
• [DocBox] (optional).

NOTE

You can only delete the active print job   in the list of [Scheduled jobs] when the printer is on

hold.

Select the jobs you want to delete

The table below describes your options to select one or more jobs.

Select one or more jobs that you want to delete

What to delete?

How to do?

One or more separate jobs

Go to the correct location described above, then touch the jobs
one by one.

All jobs

Go to the correct location, then touch [Select] -> [All].

[Jobs with available media] Go to the correct location, then touch [Select] -> [Jobs with availa-

ble media].

[Jobs with label]

Go to the correct location, then touch [Select] -> [Jobs with label].

[Printed jobs] in the [Doc-
Box].

Go to the [DocBox], then touch [Select] -> [Printed jobs].

[New jobs] in the [DocBox]. Go to the [DocBox], then touch [Select] -> [New jobs].

NOTE

For the list of [Printed jobs], you can indicate in the Settings Editor that the list must be cleaned

automatically at specified times. The factory default is 1 day. Furthermore, in the Settings Editor

you can manually clean up the jobs in the lists of [Printed jobs], [Scheduled jobs], [Waiting jobs]

and the [DocBox].

Procedure

1.

Go to one of the following locations.
• Touch [Jobs] -> [Queues]

If collapsed, first touch   to expand the list of [Scheduled jobs] or [Waiting jobs].

• Touch [Jobs] -> [Printed jobs]

2.

Select the jobs you want to delete.

3.

Press [Delete].
A message appears.

4.

When you are sure that you want to delete the selected job(s), touch [Yes].

Delete print jobs

178

Chapter 8 - Carry out print jobs

Summary of Contents for IMAGEPRESS C7010VPS








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands