manualshive.com logo in svg

Canon IMAGEPRESS C7010VPS, Operation Manual

Share
Download
Canon IMAGEPRESS C7010VPS Operation Manual Download Page 268

Record item

Description

NOTE

You can overrule this setting on the printer operator panel.

OrigFormat
(paper size and feed direction of the
originals)

The paper size and feed direction of the originals on the
scanner, for example A4 lef.
Paper sizes:
• A5
• Statement 5.5x8.5
• B5
• Letter 8.5x11
• A4
• Foolscap
• Folio
• Legal 8.5x14
• B4
• A3
• US Gov 8x10.5
• Tabloid 11x17
• Commercial
• Letter Gov 8.5x10
• Legal Gov 8.5x12
• Letter 8.25x10
• Legal 8.5x13

Feed directions:
• sef (short-edge feed)
• lef (long-edge feed).

NOTE

You can overrule this setting on the printer operator panel.

DestFormat
(paper size of the output)

The paper size of the resulting scan file. Select a paper
size from the list described in <OrigFormat>. You cannot
select a feed direction.

NOTE

You can overrule this setting on the printer operator panel.

DestQuality
(quality of the output)

Define the quality as a percentage. This item is used for
file types which support loss compression, JPG for ex-
ample. For other file types, it is ignored.
Any value from 1 to 100.

NOTE

You can overrule this setting on the printer operator panel.

DestColor
(type of color of the output)

Define the color mode of the resulting scan file, either
color, grayscale or black & white.
• color
• grayscale
• blackAndwhite

NOTE

You can overrule this setting on the printer operator panel.

Use the scan profiles file (sjt.csv)

268

Chapter 10 - Carry out scan jobs

Summary of Contents for IMAGEPRESS C7010VPS








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands