Canon IMAGEPRESS C7010VPS, Operation Manual

Page: 252 / 391

Copy non-standard size originals
Introduction
You can use the automatic document feeder to copy originals in a simple and quick way. The
automatic document feeder supports the following standard media sizes.
• A5, A5R, A4, A4R, A3, B5, B5R, and B4
• LGL, LTR, LTRR, STMTL, 13" x 19.2" (330.2 mm x 487.7 mm), 12" x 18" (305 mm x 457 mm), 11"
x 17" (279 mm x 432 mm)
If more than one media fits, the user must select the desired media. The selected media will be
the default media.
The glass plate is the location where you usually place originals that the automatic document
feeder cannot handle. The glass plate cannot detect the dimensions of your original. When you
copy from the glass plate, you must always define the size of your original.
Procedure
1.
Place the originals face up into the ADF, or place 1 original face down on the glass plate.
2.
Touch [Jobs] -> [Copy/Scan] -> [Copy job].
3.
In the [Original] section, touch [Size].
4.
Use the - and + buttons to enter the correct media size.
5.
Press [OK].
The [Size] button displays the defined size.
6. In the [Output] section, touch [Media].
7. Select a media from the list and touch [OK].
The setting [Zoom] determines how the copy will look. When [Zoom] ->[Fit to page] is enabled,
the original will be scaled to fit the media size of the output. When [Zoom] -> [Fit to page] is
disabled, you can enter a custom zoom percentage.
Copy non-standard size originals
252 Chapter 9 - Carry out copy jobs