manualshive.com logo in svg

Canon IMAGEPRESS C7010VPS, Operation Manual

Share
Download
Canon IMAGEPRESS C7010VPS Operation Manual Download Page 255

Adjust the image to improve the copy and scan quality

Introduction

The [Adjust image] setting enables you to define the copy and scan quality manually. Depending
on the situation, you can describe the original or the copy/scan.

Procedure

1.

Place the originals face up into the ADF, or place 1 original face down on the glass plate.

2.

Touch [Jobs] -> [Copy/Scan] -> [Copy job].

3.

Press [Adjust image].
A window opens.

4.

Determine if you need to describe the original or the copy/scan.
• If the original is not okay, describe the original.
• If the original is okay, but you want a different copy or scan, describe the copy.

5.

If required, adjust the following settings.
• [Brightness]
• [Contrast]
• [Color]

6.

Press [OK].

Adjust the image to improve the copy and scan quality

Chapter 9 - Carry out copy jobs

255

Summary of Contents for IMAGEPRESS C7010VPS








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands