manualshive.com logo in svg

Canon IMAGEPRESS C7010VPS, Operation Manual

Share
Download
Canon IMAGEPRESS C7010VPS Operation Manual Download Page 164

Setting

Values

Description

[Print delivery]

[Output loca-
tion]

Select the output location for the print job. Depending on the
settings for your print job, the machine automatically sug-
gests the preferred output location for your job. However,
you can manually overrule this suggestion.

[Sort]

[By page]
The output is sorted by page.

[By set]
The output is sorted by set.

[Offset stack-
ing]

[Each set]
Each set that gets to an output location will be shifted on top
of the previous set.
This setting is only available when in the workflow profile
offset stacking is set to [Sets (as in job)].

[Off]
All the sets or jobs that get to an output location will be
stacked in one straight pile.

[Advanced set-
tings] -> [Sheet
order]

[Face up]
Deliver the prints face up, first sheet on top.

[Face up reverse]
Deliver the prints face up, last sheet on top.

[Face down]
Deliver the prints face down, first sheet on top.

[Face down reverse]
Deliver the prints face down, last sheet on top.

4

Description of the print job settings

164

Chapter 8 - Carry out print jobs

Summary of Contents for IMAGEPRESS C7010VPS








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands