manualshive.com logo in svg

Canon IMAGEPRESS C7010VPS, Operation Manual

Share
Download
Canon IMAGEPRESS C7010VPS Operation Manual Download Page 219

IPDS

Media information

Introduction

The media catalog:
• Contains a list of predefined media and their attributes.
• Is an essential part of the system behavior of the imagePRESS C7011VPS / C7010VPS series.
• Helps you to print your jobs more easily while using the correct media.

Media information

Make sure that the [Tray selection mechanism] setting in the Settings Editor is set to [Tray to
media].

This is the preferred setting. The printer is a media-based machine. The tray-to-media method
supports this behavior.

For [IPDS tray to media for tray 1] assign the media catalogue item from the list. The list displays
all the media in the media catalog. The system copies the media attributes from the selected
media to the transaction setup.

When you assign A3/Tabloid-like media or want to use short-edge feed for other media, change
the feed direction to [Short-edge feed (SEF)].

NOTE

The Settings Editor displays only the media for which the media name is consistent with the

IPDS media name definitions. Valid characters for an IPDS media name are: A-Z, a-z, 0-9, blank.

IPDS

Chapter 8 - Carry out print jobs

219

Summary of Contents for IMAGEPRESS C7010VPS








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands