manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 589 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 589

Sample Reports

9-5

9

Ap

pe

ndix

 

Device Information Communication Log Report

The Device Information Communication Log Report contains information about device 
information that has been delivered and received. You can select to print the Device Information 
Communication Log Report manually or automatically.

You can also select to either print the Communication Log after the number of send and receive 
transmissions reaches 100, or specify to print it at a specified time. For more information, see 
"Checking/Printing the Communication Log," on p. 6-57.

■

START TIME

Prints the date and time (in 24-hour notation) when device information communication started. (An 
asterisk (*) indicates that a report has already been printed.)

■

END TIME

Prints the date and time (in 24-hour notation) when device information delivery/reception completed.

■

TYPE

Displays whether the device information was delivered or received.

■

TO/FROM

Prints the delivery destination if the device information was delivered.

Prints the delivery source if the device information was received.

■

CONTENT

Prints the device information that was delivered/received.

■

RESULT

Prints "OK" if the communication was completed successfully, or "NG" (No Good) if there was a 
communication error.

If an error occurred during communication, the error code is also printed.

********************************************************************

********************************************************************

********************************************************************

27/08 2008 WED 13:58

iPR C1+

001

* 2 1 / 0 8   1 4 : 0 4

* 2 1 / 0 8   1 4 : 0 5

S T A R T   T I M E

D E L I V E R

D E L I V E R

1 1 1 . 1 1 . 1 1 1 . 1 1 1

2 2 2 . 2 2 . 2 2 2 . 2 2 2

A D D . F U N C T N S   S E T . V A L U E

D E P T .   I D

A D D R E S S   B O O K

E N D   T I M E

T Y P E

D A T A   C O N T E N T

R E S U L T

D E V I C E   I N F O R M A T I O N   C O M M U N I C A T I O N   L O G   R E P O R T

T O / F R O M

2 1 / 0 8   1 4 : 0 4

2 1 / 0 8   1 4 : 0 6

N G

N G

N G

# 7 5 4

# 7 5 4

# 7 5 4

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments