manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 320 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 320

MEAP Settings

6-36

6

Syste

m

 Man

age

r Set

ti

ngs

Items printed for each application are as follows:

•

MEAP Contents: Prints the MEAP version.

•

MEAP Specifications: Prints information regarding the MEAP function.

•

Application Name: Prints the name of the application.

•

Application ID/System Application Name: Prints the system application's file name or the 
Application ID of a standard application.

•

Application Version: Prints the application's version number.

•

Status: Prints the status of the application.

•

Installed on: Prints the date and time the application was installed.

•

Vendor: Prints the name of the application vendor.

•

License Status: Prints the license status.

•

License Expires After: Prints the expiration date of the license. If License Status shows 
"Unnecessary" as its value, the expiration date is not printed.

•

License Upper Limit: Prints the upper license limit for each counter. If License Status shows 
"Unnecessary" as its value, the upper license limit is not printed.

•

Counter Value: Prints the current value for each counter. If License Status shows 
"Unnecessary" as its value, the current counter value is not printed.

•

Maximum Memory Usage: Prints the maximum amount of memory that can be used by each 
application. The Maximum Memory Usage number is printed in kilobytes (KB).

•

Registered Service: Prints the service registered on the MEAP framework from the 
application. The Registered Service is printed only if there is data that corresponds to it.

NOTE

 

•

The printed items are subject to change, as we are constantly improving our products.

•

In the sample printout, an application called "PortalService" is installed on the machine. This 
application can be installed using the MEAP Administration Software CD-ROM.

- Installed:

The application has been installed successfully.

- Active:

The application is running.

- Stopped:

The application is idle.

- Installed: 

An effective license has been installed.

- Invalid:

The license is invalid.

- Overlimit: 

The installed license has exceeded its user limit.

- Unnecessary:

You do not need a license to run the application.

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments