manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 328 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 328

Specifying Device Information Delivery Settings

6-44

6

Syste

m

 Man

age

r Set

ti

ngs

CAUTION

 

Preparing for delivery and updating the information after it is received may take several 
minutes. Do not turn the main power OFF until these operations are complete. Doing so may 
result in loss of data or damage to the data.

IMPORTANT

 

•

Device information can be shared between machines of the same model, and which have the Device 
Information Delivery Settings mode. However, some information may not be delivered correctly 
depending on the optional equipment that is attached to the machines.

•

If [Restrictions for Receiving Device Info.] under <Receiving Settings> is set to 'Off' in System Settings 
(from the Additional Functions screen), device information can be delivered from different machine 
models; however, some information may not be delivered correctly. (See "Restricting the Reception of 
Device Information," on p. 6-54.)

•

Device information cannot be delivered if the System Manager ID and System Password registered in 
the client machine differs from the System Manager ID and System Password registered in the host 
machine.

•

Printer settings can only be delivered if the same printer kit has been activated for both the client and 
host machine.

NOTE

 

Unique machine information, such as the IP address, is not delivered.

 

Registering/Deleting/Printing Delivery Destinations

You can register, confirm, and delete delivery destinations.

NOTE

 

The maximum number of destinations you can register is 100.

Registering Delivery Destinations

1

Press  

➞

 [System Settings] 

➞

 [Device Information Delivery Settings] 

➞

 [Register Destinations] under <Transmitting Settings>.

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments