Canon imagePRESS C1+, Reference Manual, Page: 119 / 622

Making Prints Using the Stack Bypass 2-47
2
Basic Oper
ations
●
If the paper you want to specify is already loaded in the stack bypass:
❑
Press [Paper Select]
➞
[Stack Bypass]
➞
select the paper size and type loaded in the stack
bypass
➞
proceed to step 6.
●
If the paper loaded in the stack bypass is not the paper that you want to
specify:
❑
Check to see if any job is reserved. (See "Checking Job Status," on p. 5-4.)
If there is a current or reserved job, you can reserve a change of paper for the stack bypass.
(See Chapter 1, "Introduction to the Copy Functions," in the
Copying and Mail Box Guide .)
If there is no reserved job, remove any paper remaining in the stack bypass
➞
continue the
procedure from step 2.
2
Adjust the slide guides to match the size of the paper.
If you are feeding large size paper, pull out the auxiliary tray.
Slide Guide
Auxiliary Tray