Canon imagePRESS C1+, Reference Manual, Page: 385 / 622

Device Management Settings 6-101
6
Syste
m
Man
age
r Set
ti
ngs
2
Press [-] or [+] to change the setting value to 1 or 2
➞
press [OK].
Details of each setting value are shown below.
3
Perform an automatic gradation adjustment (full adjustment) after
correcting the setting value of white gap correction. (See p. 6-74.)
IMPORTANT
Be sure to perform an automatic gradation adjustment after correcting the setting value of white
gap correction as the colour balance may become unstable.
1 and 2: Select when you eliminate the white gap. If "1" is selected as a setting value, you can
eliminate the white gap more effective than "2". However, the image tends to have a
jagged appearance or the density of the image tends to be light.
3: This is the default setting. Select when you want to return the original image.
4: Do not select normally. If you select this setting value, contact your local authorized
Canon dealer.