Canon imagePRESS C1+, Reference Manual, Page: 447 / 622

Paper Drawers 7-13
7
Rout
ine
Main
te
nan
ce
5
Load the tab paper into the paper drawer.
Load the tab paper face down with the tabs facing left, as shown in the illustration below.
Even out the edges of the paper stack.
Load the paper stack against the right wall of the paper drawer.
IMPORTANT
•
Paper which has been rolled or curled must be straightened out prior to use.
•
Make sure that the height of the paper stack does not exceed the limit mark ( ) at the back of
the paper drawer.
6
Squeeze the lever on the front guide, as shown in the illustration.
While squeezing the lever, slide the front guide until it fits the tab
paper.
Turn the paper size dial on the right side of the paper drawer, so that the arrow points to the
paper size being loaded.
IMPORTANT
If the paper size dial is not positioned correctly to the tab paper size loaded in the paper drawer,
the wrong paper size will be shown on the touch panel display. This may also cause paper jams,
dirty prints, or make the inside of the machine dirty.