manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 154 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 154

Card Reader-C1

3-24

3

Op

tio

n

a

l Eq

uipm

ent

Card Reader-C1

If the Card Reader-C1 is attached to the machine, you must insert a control card to operate it. 
The Card Reader-C1 performs Department ID Management by using the control card.

IMPORTANT

 

•

If you are using a login service other than the default authentication, the Limit Functions mode will not 
be available.

•

You cannot use the optional Card Reader-C1, if the 'Domain Authentication' system or the 'Domain 
Authenti Local Device Authentication' system of SSO-H is set as the login service.

NOTE

 

•

If the Basic Features screen does not appear on the touch panel display when the control card is 
inserted, make sure that:
- The control card is inserted in the correct direction.
- The control card is inserted as far as it can go.
- An unusable control card is not inserted. (For example, cards which are damaged or cards prohibited 

from use.)

•

Insert a usable control card correctly.

•

For instructions on turning the power ON, see "Main Power and Control Panel Power," on p. 1-18.

•

If the Card Reader-C1 is attached, the types of cards shown below can be used. An optical type card 
can manage up to 200 departments, and a magnetic type card can manage up to 1,000 departments.

Magnetic Type Card

Optical Type Card

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments