Canon imagePRESS C1+, Reference Manual, Page: 344 / 622

Initializing All Data/Settings 6-60
6
Syste
m
Man
age
r Set
ti
ngs
IMPORTANT
•
To prevent other users from accidentally erasing all the data on the hard disk, it is recommended to
register a System Manager ID and System Password so that only the System Manager can perform this
procedure.
•
Confirm that there are no current jobs being processed before using the Initialize All Data/Settings
mode.
•
Make sure to back up necessary data before you erase the data. For information on the data that can be
backed up, see "Backing Up Data," on p. 1-10.
•
You cannot access the machine while the hard disk is being initialized.
•
The Initialize All Data/Settings mode does not delete any data the machine has stored on a server or
computer.
1
Press
➞
[System Settings]
➞
[Initialize All Data/Settings].
2
Press [Yes].
It may take more than 30 minutes to initialize the hard disk.
IMPORTANT
If there are any current jobs being processed, they will be cancelled, and then erased.
3
After the hard disk is initialized, press the main power switch to the
" " side.
IMPORTANT
After the hard disk is initialized, and if the printed colors are different from the colors printed
before the hard disk was initialized, select [Full Adjust] in Automatic Gradation Adjustment in
Adjustment/Cleaning (from the Additional Functions screen). For more information, see
"Automatic Gradation Adjustment," on p. 4-72.