Canon imagePRESS C1+, Reference Manual, Page: 368 / 622

Device Management Settings 6-84
6
Syste
m
Man
age
r Set
ti
ngs
6
Select the number to adjust
➞
press [+] for the heavy density or [-] for
the light density
➞
[OK].
NOTE
The colour patterns on the test print are laid out in numeric order (-6 to 6) when the cyan patterns
are on top. The patterns under -6 and 6 may not be shown, depending on the paper width. In this
case, the numbers are from -5 to 5.
7
Press [Store and Finish].
The display returns to the screen of step 2. Repeat these steps until the shading is improved.
NOTE
If [Test Print] is pressed before pressing [Store and Finish], a test print with colour patterns after
adjustment is output.