Canon imageCLASS MF6540, Basic Operation Manual

Page: 256 / 270

12-31
Machine Settings
SYSTEM SETTINGS
5. VIEW IP ADDRESS Checks the current network settings.
1. IP ADDRESS Checks the IP address.
2. SUBNET MASK Checks the subnet mask.
3. GATEWAY ADDRESS Checks the gateway address.
6. STARTUP TIME SET. Sets the time period required to delay the startup of network
communications for the machine. (0–300 SEC) (0 SEC)
3. COMMUNICATIONS* Sets the facsimile communication.
1. TX START SPEED Sets the transmission speed for all sent documents.
(33600 bps, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 14400 bps)
2. RX START SPEED Sets the transmission speed for all receivable documents.
(33600 bps, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 14400 bps)
3. MEMORY LOCK Sets whether to receive and store all documents in memory
and not to print automatically. (See Chapter 4, “Sending and
Receiving (MF6595cx/MF6595/MF6590 Only),” in the Reference
Guide.)
OFF
Disables memory reception.
ON Enables memory reception.
1. PASSWORD Registers the password that protects the authority for accessing
to memory.
2. REPORT PRINT Sets whether to print a report on memory reception.
OFF
ON
–
–
3. MEMORY RX TIME Sets whether to set a period for memory reception.
OFF Disables setting a period of memory reception.
ON Enables setting a period of memory reception.
1. MEM RX START
TIME
Enters the start time.
2. MEM. RX END
TIME
Enters the end time.