Canon imageCLASS MF6540, Basic Operation Manual

Page: 205 / 270

Troubleshooting
11-2
Clearing Jams
When a jam occurs in the machine, the
paper jam message appears on the LCD
display. Check the jam location indicator
where the jam occurs, then remove the
jammed paper.
Check the following if you experience
repeated paper jams:
Fan and tap the paper stack on a
flat surface before loading it in the
machine.
Check that the paper you are using
meets the requirements for use. (See
“Paper Requirements,” on p. 2-8.)
Make sure you have removed any
scraps of paper from the inside of the
machine.
When removing jammed documents or paper,
take care not to cut your hands on the edges of the
document or paper.
When removing jammed paper or when inspecting
the inside of the machine, do not allow necklaces,
bracelets, or other metal objects to touch the
inside of the machine, as this may result in burns or
electrical shock.
If you tear the paper, remove any torn pieces to
avoid further jams.
If loose toner comes into contact with your skin or
clothing, wash with cold water. Warm water will set
the toner.
Do not use excessive force to remove a jammed
document or paper from the machine. Contact Canon
Customer Care Center for assistance if needed.
–
–
–
–
–
–
–
Document Jams
When <CHECK DOCUMENT> or
<DOCUMENT TOO LONG> appears on the
LCD display, remove the jammed document
from the ADF or the document delivery slot.
1
Open the ADF cover.
2
Remove any jammed documents.
Do not use excessive force when pulling the
document, as it may tear.