Canon GP405 Service Manual Download Page 79

Page: 79 / 682

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

3-13

CHAPTER 3 EXPOSURE SYSTEM

Caution:

The scanning lamp has its own
orientation. Keep the following in mid
when mounting it:
1. Keep the side with the manufacturer's

name to the rear.

2. Keep the transparent side to the

reflecting plate side.

3. Do not touch the transparent section.

Figure 3-504

8) Execute the following in service mode:

• FUNCTION>CCD>MAN-ADJ
• FUNCTION>DENS (5 items)

2. Removing the Pre-Exposure Lamp

Assembly

1) Remove the drum unit.
2) Remove the inside cover.
3) Remove the screw [2], and disconnect the

connector [3]; then, detach the pre-
exposure lamp assembly [1].

Figure 3-505

B. Scanner Drive Assembly

1. Removing the Scanner Drive Motor

1) Remove the copyboard glass.
2) Remove the rear cover and the rear upper

cover.

3) Remove the flywheel.
4) Remove the two screws [2], and

disconnect the two connectors [3]; then,
detach the RDF connector mount [1].

Figure 3-506

5) Remove the two screws, and disconnect

the two connectors; then, detach the
cooling fan unit [4].

Figure 3-507

Reflecting plate

Transparent section

[3]

[1]

[2]

[1]

[2]

[3]

[4]

[5]

[6]

Summary of Contents for GP405






































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GP405

Reviews:

Brands by name

Popular brands

Canon GP405, Service Manual

Search results

Summary of Contents for GP405

Reviews:

Brands by name

Popular brands