manualshive.com logo in svg

Canon GP405, Service Manual

Share
Download
Canon GP405 Service Manual Download Page 628

CHAPTER 14  TROUBLESHOOTING

14-210

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

Level 3

TYPE

TXPH

Remarks

Operation
1) Select 'PG', and

enter the number
of the item on the
keypad.

2) Press the OK key

and then the Copy
Start key to
generate a test
print.

Description

Selects and generates a test print (1 through 8).
When the PG screen is closed by resetting, '0' will
automatically be set to return to normal copying mode.
•

Selecting the Source of Paper
When a paper type is selected on the Initial screen,
paper will be picked up from the selected holder.
If auto selection (no source is selected) is enabled, the
topmost holder will be used.

0 represents normal copying mode (image from the CCD).

Selects the output mode for the test print selected by
TYPE.
Switches between text mode and photo mode. This mode is
effective only when making test prints, and the setting will
be disabled when the PG screen is closed.
0: text mode
1: photo mode

Summary of Contents for GP405











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands