manualshive.com logo in svg

Canon GP405, Service Manual

Share
Download
Canon GP405 Service Manual Download Page 198

CHAPTER 7  PICK-UP/FEEDING SYSTEM

7-36

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

4. Detecting the Point of Horizontal Registration

a.

Outline
•

Paper is picked up from the lower feeding assembly without positioning it in the rear/front
direction, requiring detection of displacement while it is being moved. To this end, paper is
checked for horizontal registration when it is moved from the lower feeding assembly.

•

The rear/front registration detection mechanism is located near the vertical path roller
assembly, and consists of a horizontal registration sensor (PS10) and a horizontal
registration shift motor (M9).

•

The horizontal registration sensor shift motor (M9) is used to move the horizontal
resignation sensor (PS10), and it detects the edge of paper for synchronization with the
point of laser exposure.

Figure 7-132

M9

PS10

Copy paper

10 mm (approx..)

Detection start position

Home position

Summary of Contents for GP405











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands