manualshive.com logo in svg

Canon GP405, Service Manual

Share
Download
Canon GP405 Service Manual Download Page 202

CHAPTER 7  PICK-UP/FEEDING SYSTEM

7-40

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

J.  Delivery Assembly

1. Outline

The machine provides two ways of delivery selected in service mode:

a.

Face down

b.

Face up

a.

Face-Down Delivery
In face-down delivery, the copied side or the odd-number side of a double-sided copy is

delivered facing down.

After being moved through the fixing assembly, the paper is controlled by the delivery flapper

and fed to the left vertical path assembly. A specific time after the trailing edge of the paper moves
past the revering assembly inlet sensor (PS6), the reversal feeding roller 1 starts to rotate in reverse.
At this time, the delivery flapper solenoid (SL2) remains off, and the paper is fed to the delivery
assembly for face-down delivery.

Figure 7-137

Figure 7-138

b.

Face-Up Delivery
In face-up delivery, the copied side or the odd-number side of a double-sided copy is delivered

facing up. The delivery flapper solenoid (SL2) is on.

SL2=OFF

PS6

M10

M7

Point of face-down reversal

Point of duplexing 
reversal

SL2=OFF

PS6

M8

M10

M7

M8

Summary of Contents for GP405











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands