manualshive.com logo in svg

Canon GP405, Service Manual

Share
Download
Canon GP405 Service Manual Download Page 350

CHAPTER 11  SYSTEM INTEGRATION

11-6

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

C.  Hardware

The following shows the connectors, LED, ROMs, and fuse used on the board:

Fu101
(SCSI)

IC112S
(4MB PROM)

J8501
System motherboard

J8503

(SCSI-2)

J8502

(SCSI-2)

LED101

CPU

Image memory
(DRAM 10MB)

Figure 11-202

Item

J8501

J8502/J8503

Fu 101

LED 101

IC112S

Description

Used it for connection to the system motherboard.

Use it to connect the host computer/terminator (shared).

Use it to prevent overcurrent to the SCSI PCB. E603 will be indicated when Fu101
blows.

<LED is On or Off>
The CPU on the SCSI PCB is not operating (faulty PCB). E601 is indicated on the
control panel.
<LED is Flashing (on for 0.2 sec; remains off longer)>
The CPU on the SCSI PCB is operating, but the cable connection is poor or the PCB is
faulty. E601 is indicated on the control panel.
<LED is Flashing (off and on at intervals of 0.5 sec)>
The operation is normal.

Used for SCSI.

Table 11-202

Summary of Contents for GP405











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands