manualshive.com logo in svg

Canon GP405, Service Manual

Share
Download
Canon GP405 Service Manual Download Page 174

CHAPTER 7  PICK-UP/FEEDING SYSTEM

7-12

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

d.

Moving Up/Down the Pick-Up Roller (pick-up operation)
The pick-up roller and the feeding roller are kept in a roller holder, and the pick-up roller

operates in conjunction with the feeding roller shaft. The pick-up roller shaft is moved up/down by
the cam 1, controlled by the pick-up solenoid (SL1) driven by the main motor (M1).

In standby, the pick-up roller shaft is at its upper limit, operating as follows when picking up a

single sheet of paper:

1) The pick-up solenoid (SL1) turns on, and the drive of the cam motor rotates the cam 1.
2) As a result, the pick-up lever starts to swing.
3) As a result, the pick-up roller shaft moves down to come into contact with the stack of

paper, and picks a single sheet by the drive of the pick-up motor (M5).

4) The cam 1 rotates and, as a result, the pick-up roll shaft moves up.

Figure 7-110   Pick-Up Roller Shaft Arrangement

Figure 7-111   Pick-Up Roller Shaft Up/Down Movement

ON

ON

Feeding roller

Feeding roller shaft

Pick-up roller shaft

Pick-up lever

Cam 1

Pick-up solenoid 
(SL1)

Roller holder

Pick-up roller

SL2 turns on to rotate the cam 1.

Pick-up 
roller shaft

Roller holder

Summary of Contents for GP405











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands