manualshive.com logo in svg

Canon GP405, Service Manual

Share
Download
Canon GP405 Service Manual Download Page 188

CHAPTER 7  PICK-UP/FEEDING SYSTEM

7-26

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

2. Detecting the Size of Paper (multifeeder)

n

Detecting the Width
The width of paper is detected by the variable resistor (VR1751) operating in conjunction with
the movement of the slide guide. The slide guide is set by the user to suit the size of the paper
placed on the multifeeder tray.

n

Rear/Front Registration
The rear/front registration for multifeeder pick-up may be adjusted using the screw on the slide
guide. For details, see II. "Standards and Adjustments."

n

Detecting the Length
The length of paper is detected in reference to the period of time during which the pre-
registration sensor (PS4) remains on. The maximum paper length is identified by 432 x 279
mm (11" x 17").

Figure 7-127-2

3. Sequence of Operations (A4, 2 copies)

Figure 7-127-3

Slide guide (rear)

Variable resistor

Multifeeder tray

Slide guide (front)

INTR

SCFW

SCRV

SCFW

Multifeeder holding plate 
releasing solenoid (SL3)

Multifeeder pick-up 
clutch (CL2)

Pre-registration roller 
sensor (PS4)

Registration roller 
clutch (CL1)

Main motor (M1)

Copy Start key ON

Summary of Contents for GP405











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands