manualshive.com logo in svg

Canon GP405, Service Manual

Share
Download
Canon GP405 Service Manual Download Page 179

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

7-17

CHAPTER 7  PICK-UP/FEEDING SYSTEM

2. Moving Up the Pick-Up Roller Shaft and Releasing the Lifter/Separation Roller

(cassette slid out)

a.

Moving Up the Pick-Up Roller Shaft and Releasing the Separation Roller
When the cassette is slid out of the machine, the pick-up roller shaft is moved up and the

separation roller is released mechanically.

•

Moving Up the Pick-Up Roller
When the cassette is slid out, the lever rotates by the force of a spring, moving up the pick-
up roller shaft so that the pick-up roller will not interfere with the cassette.

Figure 7-118   Moving Up the Pick-Up Roller

•

Releasing the Separation Roller
The lever 1 is provided with a protrusion for pushing down the separation roller assembly.
When the cassette is slid out, the lever 1 rotates to move down the separation roller, thereby
disengaging the separation roller and the feeding roller (Figure 7-119).

Figure 7-119   Releasing the Separation Roller

b. Releasing the Lifter

The lifter is released when the cassette is slid out while in standby state.

Pick-up roller shaft

Spring

Feeding roller

Lever 1

Cassette

Pick-up roller

Protrusion of the lever 1

Separation roller

Cassette

Summary of Contents for GP405











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands