manualshive.com logo in svg

Canon GP405, Service Manual

Share
Download
Canon GP405 Service Manual Download Page 152

CHAPTER 6  IMAGE FORMATION SYSTEM

6-24

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

A.  Drum Unit

1. Removing the Drum Unit

1) Open the front door.
2) Release the feeding assembly.
3) Release the developing assembly.
4) Remove the screw [1].
5) Pull the drum unit [2] slowly to the front.

Figure 6-400

Caution:

1. Take care not to damage he photosensitive

drum.

2. The photosensitive drum is extremely

sensitive to light. Exposure to room
light can lead to white spots or black
bands.

2. Cleaning

If the surface of the photosensitive drum

is soiled, wipe it with a flannel cloth coated
with toner. (Do not use paper, lint-free or
otherwise.)

Caution:

Do not dry wipe, or do not use solvent.
Do not use cleaning powder.

3. When Replacing the Drum Unit

When replacing the drum unit, fill out the

label (figure 6-401) with the date and the
counter reading; attach the label to the front
cover of the new drum unit, and perform the
Image Adjustment Basic Procedure.

Figure 6-401

After replacing the drum unit, be sure to

clean the fixing separation claws (upper,
lower).

[2]

[1]

date

compteur.

Datum

Zahler

Notiz

note

Summary of Contents for GP405











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands