Canon FAX-L360 User Manual Download

Page: 259 / 374

13-20

Frequently Asked Questions

Chapter 13

After Clearing a Paper Jam

After removing the jammed paper, follow these steps:

Install the FX-3 toner cartridge back in the unit (see page 2-31).

Move the paper release lever back to its original position (toward the
front).

Close the front cover to reset the unit.

Load paper in the paper cassette or the multi-purpose tray.

❏

If you are experiencing repeated paper jams, it may be due to the
paper you are using:

•

Tap the paper on a flat surface before stacking it in the paper
cassette/the multi-purpose tray.

•

Check that the paper you are using and your printing
environment are within the specifications of the unit. See
Appendix A, “Specifications.”

❏

Make sure you have removed any scraps of paper from inside the
FAX-L360. Not doing so will cause paper to jam again.

Summary of Contents for FAX-L360























































































































































































































































































































































































Search results

Summary of Contents for FAX-L360

Reviews:

Related manuals for FAX-L360

Brands by name

Popular brands

Canon FAX-L360, User Manual

Search results

Summary of Contents for FAX-L360

Reviews:

Related manuals for FAX-L360

Brands by name

Popular brands