Canon FAX-L360 User Manual Download

Page: 247 / 374

13-8

Frequently Asked Questions

Chapter 13

Jams in the Paper Cassette?

If the recording paper jams or misfeeds while you are printing or
copying, check the following areas in the order described below.

Be sure to remove any documents or printed pages from the fax before
removing the paper jam.

Remove the paper cassette.

❏

Be careful not to drop the cassette as you pull it out.

If there is any jammed paper inside the fax, gently pull it out of the
unit being careful not to tear it.

Remove the stack of paper from the cassette and do the following:

Fan the stack of paper, and tap it on a flat surface to even out the
stack.

Summary of Contents for FAX-L360























































































































































































































































































































































































Search results

Summary of Contents for FAX-L360

Reviews:

Related manuals for FAX-L360

Brands by name

Popular brands

Canon FAX-L360, User Manual

Search results

Summary of Contents for FAX-L360

Reviews:

Related manuals for FAX-L360

Brands by name

Popular brands