manualshive.com logo in svg

Canon FAX-L360, User Manual

Share
Download
Canon FAX-L360 User Manual Download Page 144

 

Sending Faxes

 

Chapter 6

Sending Faxes

 

6-13

 

Setting the Resolution and Contrast

 

Setting the Scanning Resolution 

 

Canon’s Ultra High Quality (UHQ

 

™

 

) imaging technology enables you to 

send faxes with a print quality that is very close to that of the original 
document. The FAX-L360 also lets you adjust the resolution it uses in 
sending faxes to best suit your particular document.

The FAX-L360 has five resolution settings:

 

❏

 

FAX STANDARD

 

 resolution (203 

 

×

 

 98 dpi) is adequate for most text 

documents. 

 

❏

 

FAX FINE

 

 resolution (203 

 

×

 

 196 dpi) is suitable for documents with 

fine print (smaller than the print in this sentence).

 

❏

 

FAX PHOTO

 

 resolution (203 

 

×

 

 196 dpi, with halftones) is for 

documents that contain photographs. With this setting, areas of the 
document that contain photos are automatically scanned with 64 
levels of grey, rather than just two (black and white). This gives a 
much better reproduction of the photos, though transmission time is 
longer. 

 

❏

 

SUPER FINE 

 

resolution (203 

 

×

 

 391 dpi) is for documents that contain 

fine print and images (much smaller than the print in this sentence), 
and its resolution is four times of FAX STANDARD.

 

❏

 

ULTRA FINE 

 

resolution (406 

 

×

 

 391 dpi) is for documents that contain 

fine print and images (much smaller than the print in this sentence), 
and its resolution is eight times of FAX STANDARD.

Set the resolution as follows:

1.

Press 

 

Resolution

 

. 

 

❏

 

The LCD display shows the current resolution setting.

2.

Press 

 

Resolution

 

 until the resolution you want is displayed.

F A X R E S O L U T I O N
F A X S T A N D A R D

Resolution

F A X R E S O L U T I O N
F A X S T A N D A R D

Resolution

Summary of Contents for FAX-L360























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands