manualshive.com logo in svg

Canon FAX-L360, User Manual

Share
Download
Canon FAX-L360 User Manual Download Page 149

6-18

Sending Faxes

Chapter 6

Sending Documents

This section describes the different ways to send faxes with the 
FAX-L360.

Manual Sending Via the Handset

You can send faxes manually. This allows you to talk to the other party 
via the handset before sending the fax, which can be useful if the other 
party uses a single line for both voice and fax transmissions.

Be sure to adjust the document feed lever before loading your document. 
See page 6-6 for details.

1.

Prepare the document and load it, face down, into the Automatic 
Document Feeder (ADF).

❏

Once the document is loaded, the LCD display shows the 
following:

❏

If necessary, you can adjust the resolution and contrast. See page 
6-13 for details.

2.

Lift the handset and dial the number.

-or-

Press Hook or pick up the handset and dial the number.

After you press Hook or pick up the handset, the In Use/Memory 
lamp blinks green and you will be able to hear the dial tone.

❏

Use one of the dialling methods described on page 6-17.

N

M E M O R Y U S E D  

0 %

D O C U M E N T R E A D Y

T E L =

2 8 8 7 0 1 6 6

Summary of Contents for FAX-L360























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands