manualshive.com logo in svg

Canon FAX-L360, User Manual

Share
Download
Canon FAX-L360 User Manual Download Page 17

 

1-6

 

Introducing the FAX-L360

Chapter 1

 

Using the FAX-L360 With the Printer Driver

 

The printer driver that is included with your FAX-L360 unit allows you to 
use the FAX-L360’s printing function directly from your PC.

 

❏

 

Use the FAX-L360 as the default printer for Windows applications

For more information on using the printer driver with your FAX-L360, 
refer to the Printer Driver Guide also stored on this CD-ROM.

 

The supplied printer driver is designed to operate with Windows 98, 
Windows Me, Windows 2000, or Windows XP.

 

System Requirements

 

The following hardware and software are necessary to operate the printer 
driver with the FAX-L360. These are the minimum requirements.

 

❏

 

Windows Operating System

 

Microsoft Windows 98, Windows Me, Windows 2000, or Windows 
XP.

 

❏

 

USB port

 

❏

 

Computer Processor

 

• Windows 98: A 90-megahertz (MHz) Pentium processor or higher

• Windows Me: A 150-MHz Pentium processor or higher

• Windows 2000: A 133-MHz Pentium processor or higher

• Windows XP: A 233-MHz Pentium processor or higher

 

❏

 

Memory

 

• Windows 98/Me: 32 megabytes (MB) of RAM, 64 MB of RAM or 

more is recommended.

• Windows 2000/XP: 64 MB of RAM, 128 MB of RAM or more is 

recommended.

N

Summary of Contents for FAX-L360























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands