6-3
6
SENDING DOCUMENTS
3
Use [
1
] or [
2
] to select SCAN CONTRAST.
▼
Press [Start/Copy].
4
Use [
1
] or [
2
] to adjust the scanning contrast.
You can select STANDARD, DARKER or
LIGHTER.
▼
Press [Start/Copy].
5
Press [Stop].
Setting ends and the fax returns to standby mode.
Sending methods ______________________________
■
Memory sending (see p. 6-5)
Each time you send a document, the fax quickly scans the document into memory and then sends
the document from memory after it has dialled the receiving party. This is called memory sending.
Memory sending allows you to remove the original document immediately after scanning.
If MEMORY FULL appears on the LCD when you load the document into the ADF, dial the
receiving number and press [Start/Copy]. In this case, the document is not scanned into memory but
is sent directly to the receiving party.
■
Manual sending (see p. 6-6)
If you would like to speak with the receiving party before sending a document to them, use manual
sending. When sending manually, you dial, converse normally and then press [Start/Copy] to begin
sending.
For manual sending, you need to have the handset (included with your fax) or an optional extension
phone connected.
■
Internet fax (see the separate Internet Fax Manual)
SCAN CONTRAST
STANDARD
DARKER
OFFHOOK ALARM
Preparing to send a document
Ex:
Ex:
