8-11
USING THE BUIL
T-IN ANSWERING MACHINE (T
AM MODE) (F
AX-EB15 only)
8
Using remote control____________________________
1
Call home.
2
The outgoing message will be played.
3
Press [#] while the outgoing message is playing.
Enter your password when you hear the beeps
indicating that you should enter your password.
When your password is accepted, you will hear
a confirmation tone (a short series of beeps).
4
The fax will now accept remote commands.
(see List of remote control commands, p. 8-12)
For example, press [1][1][#] to play back any
telephone messages you may have received. When
playback has finished, press [9][9][#] to end the
remote control.
5
End the remote control and hang up the handset.
n
• A password is required to use the remote control features. However, if PIN ENTRY is set to OFF (see
p. 8-15), it is not necessary to enter your password when you use the FORWARDING MSG feature
(see p. 8-13).
• If you enter an invalid password, you will hear an error tone. If you enter two invalid passwords
consecutively, the call will be disconnected.
• You should enter a remote command within 20 seconds of entering your password. If more than 20
seconds elapse after you enter your password and you do not enter a remote command, the call will
be disconnected.
• Note that there is the possibility that a third party could access your messages by chance if they enter
a number that matches your password.
• The remote control features can be used even when the fax is set to a mode other than TAM MODE.
• In FAX ONLY MODE, the outgoing message will not be played. Press [#] when the call is connected.
• In Fax/Tel mode (FAX/TEL AUTO SW), press [#] while the outgoing message is playing. If you
have not set an outgoing message, press [#] when the call is connected.
• In MANUAL MODE, press [#] if MAN/AUTO SWITCH has been set. If MAN/AUTO SWITCH is
off, the fax will ring 15 times. Enter your password when you hear the beeps indicating that you
should enter your password.
Remote control features
