3-3
HANDLING DOCUMENTS
3
1
Open the document tray.
2
Adjust the document guides to the width
of the document.
Follow the procedure below to load documents into the Automatic Document Feeder (ADF).
Loading documents
n
• For a multipage document, the pages are fed one by one from the bottom of the stack.
• Wait until all pages of your document have been scanned before starting a new job.
• Make sure you follow the procedure above to load documents into the ADF. If the document is not
loaded into the ADF correctly, it may not feed into the fax properly; resulting in a jam, or in pages not
being sent.
• If you want to send a document with more than 20 pages, divide the document into 2 sections and
send each section in a separate transmission.
3
Gently insert the top of the document
face down into the ADF until you hear a
beep.
Tap multipage documents on a flat surface to
even the edges before inserting them into the
ADF.