Canon FAX EB15 Page 127 User Manual Download

Page: 127 / 155

10-2

Clearing jams

Jams in the Automatic Document Feeder (ADF)

When a document jams or misfeeds in the ADF, CHECK DOCUMENT is displayed on the LCD.

Follow the procedure below to clear the document jam.

You do not need to unplug the fax when clearing document jams.

Press [Stop].

Open the operation panel partially by
gently pulling it towards you.

While holding the operation panel open,
remove the document.

When you are finished, close the operation
panel by pressing it down from the centre.

• It only opens slightly.
• Do not try to pull the document out without

opening the operation panel since you may
tear or smudge the document.

• Pull it gently in either direction.
• If a multipage document is loaded, remove the

entire document from the ADF.

If the paper does not pull out easily, do not
force it. Contact your local authorised Canon
dealer or the Canon help line.

Be sure to close the operation panel until it
locks into place, or the fax will not function
properly.

Summary of Contents for FAX EB15




























































































































































Search results

Summary of Contents for FAX EB15

Reviews:

Related manuals for FAX EB15

Brands by name

Popular brands

Canon FAX EB15, User Manual

Search results

Summary of Contents for FAX EB15

Reviews:

Related manuals for FAX EB15

Brands by name

Popular brands