Canon EOS R10, User Manual

Page: 868 / 919

The continuous shooting speed is slow.
High-speed continuous shooting may be slower depending on the battery level, ambient
temperature, flicker reduction, shutter speed, aperture value, subject conditions,
brightness, AF operation, type of lens, use of flash, shooting settings, and other
conditions. For details, see
Selecting the Drive Mode or Maximum burst for continuous
shooting [Approx.] .
The maximum burst during continuous shooting is lower.
Shooting intricate subjects such as fields of grass may result in larger file sizes, and the
actual maximum burst may be lower than the guidelines in
Maximum burst for
continuous shooting [Approx.] .
Even after I change the card, the maximum burst displayed for
continuous shooting does not change.
Estimated maximum burst indicated in the viewfinder does not change when you switch
cards, even if you switch to a high-speed card. Maximum burst listed in
Maximum burst
for continuous shooting [Approx.] is based on the standard Canon test card, and the
actual maximum burst is higher for cards with faster writing speeds. For this reason,
estimated maximum burst may differ from actual maximum burst.
High-speed display is not available during high-speed continuous
shooting.
Refer to the high-speed display requirements in High-Speed Display .
The aspect ratio cannot be set.
Aspect ratios cannot be set when [ : Add cropping information ] is set to an option
other than [ Disable ].
ISO 100 cannot be set for still photo shooting.
The minimum speed in the ISO speed range is ISO 200 when [ : Highlight tone
priority ] is set to [ Enable ] or [ Enhanced ].
868