Canon EOS 6D Mark II, Instruction Manual

Page: 570 / 610

570
Specifications
• Autofocus (during viewfinder shooting)
Type: TTL secondary image-registration, phase-difference
detection with the dedicated AF sensor
AF points: Max. 45 points (Cross-type AF point: Max. 45 points)
* Number of available AF points, Dual cross-type AF
points, and Cross-type AF points vary depending on
the lens used.
* Dual cross-type focusing at f/2.8 with center AF point
when Group A (of the AF groups) lenses are used.
Focusing brightness
range: EV -3 - 18 (with the center AF point supporting f/2.8,
One-Shot AF, room temperature, ISO 100)
Focus operation: One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing
(MF)
AF area selection mode:Single-point Spot AF (manual selection), Single-point AF
(manual selection), Zone AF (manual selection of zone),
Large zone AF (manual selection of zone), Automatic
selection AF
AF point automatic
selection conditions: Automatic AF point selection possible based on color
information equivalent to human skin-tone
AI Servo AF
characteristics: Characteristics can be set with Custom Functions for
Tracking sensitivity, Acceleration/deceleration tracking,
and AF point auto switching
AF fine adjustment: AF Microadjustment (All lenses by the same amount,
Adjust by lens)
AF-assist beam: With the EOS-dedicated external Speedlite
• Exposure Control
Metering mode: Approx. 7,560-pixel RGB+IR metering sensor and
63-zone TTL open-aperture metering
• Evaluative metering (linked to all AF points)
• Partial metering (approx. 6.5% of viewfinder at center)
• Spot metering (approx. 3.2% of viewfinder at center)
• Center-weighted average metering
Metering brightness
range: EV 1 - 20 (at room temperature, ISO 100)