Canon EOS 6D Mark II, Instruction Manual

Page: 248 / 610

248
h
Auto Exposure Bracketing (AEB)
N
If [
z
2: Auto Lighting Optimizer ] (p.194) is set to any setting other than
[ Disable ], the effect of AEB may be reduced.
During AEB shooting, <
A
> will blink in the viewfinder.
If the drive mode is set to <
u
> or <
B
>, press the shutter button three
times for each shot. When <
o
>, <
i
>, or <
M
> is set and you hold
down the shutter button completely, the three bracketed shots will be
taken consecutively and the camera will automatically stop shooting.
When <
Q
> or <
k
> is set, the three bracketed shots will be taken
consecutively after a 10-sec. or 2-sec. delay. When <
q
> is set, the
three bracketed shots multiplied by the number of shots set with [ Self-
timer: Continuous ] will be taken consecutively after a 10-sec. delay.
You can set AEB in combination with exposure compensation.
If the AEB range exceeds ±3 stops, the end of the exposure level
indicator will display <
I
> or <
J
>.
AEB cannot be used with flash, bulb exposures, or when Multi Shot
Noise Reduction or HDR Mode is set.
AEB will be canceled automatically if you do any of the following: Setting
the power switch to <
2
>, switching to movie shooting, or when the
flash is fully charged.