Canon EOS 6D Mark II, Instruction Manual

Page: 524 / 610

524
H
Using Eye-Fi Cards
Cautions for Using Eye-Fi Cards
Under [ Wi-Fi settings ] of [
5
1: Wireless communication settings ], if
[ Wi-Fi ] set to [ Enable ], image transfer with an Eye-Fi card will not be
possible.
If “
J
” is displayed, an error occurred while retrieving the card
information. Turn the camera’s power switch off and on again.
Even if [ Eye-Fi trans. ] is set to [ Disable ], it may still transmit a signal. In
hospitals, on airplanes, and in other places where wireless transmissions
are prohibited, remove the Eye-Fi card from the camera beforehand.
If the image transfer does not function, check the Eye-Fi card and
computer settings. For details, see the card’s Instruction Manual.
Depending on the wireless LAN’s connection conditions, the image
transfer may take longer or it may be interrupted.
Because of the communication function, the Eye-Fi card may become
hot.
The camera’s battery power will be consumed faster.
During the image transfer, auto power off will not take effect.
If you insert a wireless LAN card other than an Eye-Fi card, [
5
1: Eye-Fi
settings ] will not appear. Also, the transmission status icon <
H
> will not
appear.