3-40
COPYRIGHT © CANON ELECTRONICS INC. 2008
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
VI. UPPER UNIT-1 (EXTERNAL COVERS)
1. Entrance Upper Unit
1) Open the pickup roller cover.
2) Press the rear side
{
1
(marked with
¼
) of
both arms and unhook the fitting parts in-
side. The pickup roller cover opens further.
Figure 3-601
3) While holding the entrance upper guide
plate
{
1
, remove 9 screws
{
2
(M3, round
tip) and remove the entrance upper unit
{
3
.
Note:
The screws at the lower 2 places
(marked with
¼
) are hidden inside.
Remove the screws with a magnetized
screwdriver so that they do not drop
inside.
Figure 3-602
2. Pickup Roller Cover
1) Remove the entrance upper unit.
2) While bending the stopper
{
1
, push the
end of the shaft
{
2
with a tool with a thin
tip and unhook the fitting parts. Then re-
move the shaft.
When the shaft is removed, the entrance
upper guide plate
{
3
and pickup roller
cover
{
4
are separated.
Figure 3-603
