3-54
COPYRIGHT © CANON ELECTRONICS INC. 2008
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
6. U-Turn Rollers
Note:
There are 4 U-turn rollers. All of them
are same parts and can be disassem-
bled using the same disassembling
procedure.
1) Remove the upper unit.
2)
Remove the screen plate for the
post-imprinter. (3 M3 screws with round
tips)
Refer to “CHAPTER 4, INSTALLATION &
MAINTENANCE” for details.
3) Remove 2 screws
{
1
(M3, round tip) and
remove the guide plate
{
2
.
Remove 6
screws
{
3
(TP head) on both sides and
remove the U-turn guide plate
{
4
.
Figure 3-809
4) Open the end (marked with
¼
) of both
bearing holders
{
1
, and while unhooking
the fitting parts, remove the U-turn roller
unit.
Note:
For other precautions and subsequent
procedures, refer to the “Reading Roller
(Front)” section.
Figure 3-810
Notes on assembling
The positioning of the guide plate and
U-turn guide must match the positioning of
the side plate correctly.
