COPYRIGHT © CANON ELECTRONICS INC. 2008 CANON DR-X10C FIRST EDITION
3-63
CHAPTER 3 DISASSEMBLY & REASSEMBLY
5) Remove the cable and screw (M3 round
tip) and remove the PCB
{
1
and motor
{
2
.
Figure 3-1004
1) Remove the ink drain pad unit after re-
moving the rear cover. Remove 2 screws
{
1
(M3, round tip) and remove the ink
drain pad unit
{
2
.
Note:
If ink is collected in the pad, provide
paper and a storage bag to prevent
soiling of your fingers or the periphery.
Figure 3-1005
Notes on assembling
Fit the belt
{
2
into the fitting parts
{
1
of
the cartridge holder.
Insert the projection of the end surface (the
opposite side of the end surface of the
D-shape) of the guide shaft into the hole in
the mounting plate.
Figure 3-1006